You can also do to regulate the temperature in the room, taking into account your own schedule. In order to save electricity system allows you to program certain schedule your floor. For example, you go to work, on vacation or just go to sleep, given the program the thermostat lowers the temperature of the heating and the time to return home or wake up, he again warms the air and pick you up the warmth. We touch technology installation of such floors. Note that this type of heating system will not spoil the beauty and uniqueness of your interior as well as "warm floor" placed under 3-5 cm thick concrete screed and thus become invisible to your eyes. The basis of this system is heating cable that converts electricity into heat. It fits around the snake perimeter of the room and, as mentioned above, the "hidden" under a layer of concrete.
During operation, the system heats up the concrete screed, which in turn gives off heat to the environment. An important point is how should be a good cable to the floor could last for a long time. Of course, you must select a heating cable, where the inner vein may be of nichrome, brass, galvanized steel or other material constitutes know-how of the firm. And around the veins should be an insulating material consisting of two to four layers, which not only prevent any strain or cable, but also reduce electromagnetic radiation, produced by this system. For the almost complete absence of electromagnetic radiation, in addition to single cable, in practice, also use two-wire cable because the magnetic fields both lived relatively compensated. Besides working with bipolar cable is much simpler, since there is no need to cable to the top of its installation, as they do with solid. Using the "warm floor" can be as basic and Combined, that is, together with other heating elements, such as radiators.