PrintoLUX can now serve strong demand where so far is trying to take advantage of thermosetting digital printing in the printing of acrylic, the results show significant deficiencies: the standard acrylic deform and therefore not sufficient for the process of Thermohartung. It is wavy. Also streaks that persist even after printing and greatly reduce the optical quality formed by the pre-treatment mostly. Such weaknesses have resulted in that printing of acrylic with the process of thermosetting digital printing so far unfinished. That has increased with the development work of the PrintoLUX GmbH is now changed. PrintoLUX makes high-quality crystal-clear acrylic and can be printed through lengthy and detailed testing of various qualities of acrylic in Frankenthal/Pfalz, Germany-based identification specialist PrintoLUX could resistance now a transparent acrylic material to determine that on the way of thermosetting digital printing in the print as well as in the deposited negative pressure best Printing results. The newly identified quality of acrylic does not the known weaknesses in the processing.
The pressure is temperature resistant and faultless optical quality. Use indoors: surface preparation by flame treatment now used by PrintoLUX acrylic has a minimum thickness of 3 mm for printing and is to be flame from his typographical arrangement. This increases the surface energy and forms a layer of stubborn at the same time, which significantly improves the thermosetting process. Thus, a stronger adhesion of ink and higher chemical resistance is achieved. The loading Flame device suitable is easy to handle and can be purchased at PrintoLUX for nearly 1,700 net together with the printing systems and the acrylic material. Use outdoors: surface preparation by painting set printed acrylic exterior come to use, provides a material that is equipped with a special transparent varnish PrintoLUX. On these Crystal clear protective coating is printed with thermosetting ink PrintoLUX.
This is followed by the Thermohartung in heat oven at about 115 degrees. After this process, the surface is resistant to acetone and 5 to 7 years, UV and weather-resistant. Great demand among users through the newly established quality of acrylic, are connecting with the technical and economic advantages of marking pressure of PrintoLUX can, can the company now serving a large group of users, which has long been waiting for such solutions. This includes the entire area of the Office building, which are often equipped with door and corporate signage from acrylic. Bell signs and the directions of passenger elevators, acrylic is a much-used material. The acrylic pressure in art, as well as in the presentation of documents and certificates found wide application areas. Sample request possible on request allows interested customers printed material patterns come to PrintoLUX. The acrylic can be supplied in each individual crop. As The dimensions of 500 x 500 mm are supplied plate material. Other formats must be requested. The PrintoLUX of idea of PrintoLUX has a system developed and patent pending, with the PrintoLUX certified materials made of metal and plastic in industrial resistance initially in the maximum size 420 mm x 600 mm with a height of up to 500 mm can be digitally printed. The system is unique in the world and replaces previous methods, such as screen printing, engraving, laser and plotting in many application areas.