Requirements for the development of modern design, involve the use of natural materials for decoration and for furnishing. One of the most beautiful material is wood, However, along with the advantages it has some drawbacks. Firstly, it is the relatively high costs inherent in high-quality well-dried and covered with a protective and decorative compositions of the tree. Secondly, exposure to high humidity, which limits the use of this material, such as in bathrooms. Third, over time, when not carefully leaving the wood can warp, crack, change its shape and size. Now there are more practical materials for the manufacture of office partitions, furniture, decorative panels: plywood, chipboard or mdf. To make the plates decorative appearance, they are subjected to veneering, which gives a beautiful and durable products that are not exposed to extremes of temperature and having a much longer service life under virtually all conditions. Translated from the German der Spon means "Rake>>" Lining>>.
This material is a thin layer of natural wood, obtained by planing the boards or peeled steamed short decks. For the manufacture of veneer thickness from 0.2 to 5 mm used precious woods, wherein a beautiful structure: oak, beech, acacia, walnut, mahogany, Karelian birch, ash, elm, yew, and others. Sliced veneer is produced by planing the boards into thin strips. For this There are special planing machines. Sliced veneer – a valuable decoration material, used in the manufacture of furniture for living rooms, dining rooms, hallways, bedrooms, kitchens, bathrooms. In the manufacture of panels, it is important to they all meet each other in the shade, especially when it comes to producing heterogeneous furniture – kitchen, living room sets, etc.