The first stage of the technology of its manufacture is to prepare a sketch. Should first take into account the fact that the art parquet is not created spontaneously, as is well thought out piece of interior. In other words, you can not put it the way you want, not having thought at the same furniture, fixtures, accessories, or it may happen that all the outdoor beauty will be encumbered by any sofa, and the efforts of designers will be in vain. Often patterned parquet holds as a basic element of the interior – and in this case you need not detract from his attention, that is not clutter the room with furniture and accessories. That is why the original designer created the sketch, and then experts pick the appropriate color wood. To appreciate the complexity of the work, rather say that figure may include a few dozen different types of wood. It is important to take into account the technological compatibility of different types of wood – European and exotic breeds are very different from each another, and some are just impossible to locate near them without prior training.
The next step is cutting and fitting – if laying technology and has not undergone major changes over the past two centuries, the Slicing technology has moved forward – by cutting parts with laser equipment of last generation. A very important role in laying plays the preparation of the base – it must be perfectly flat. For This use leveling compounds that are applied to the soil, glue and plywood. Then, cut the parquet elements are prepared for the flooring. After sanding and priming the plywood, it bears an adhesive, to which are attached details of the parquet, and thus made them an ideal fit. The final step is polishing the finished surface, then polished. After polishing the parquet you are greeted by a real masterpiece, which will be please look for many more years. Just do not forget that any flooring is capricious and demanding to care coverage, so experts recommend every 5 years, subject to sanding and update the paintwork.