Work Write

Microprocessor-based smart card equipped with an embedded operating system that performs the necessary set of service operations and equipped with all safety devices. All information presented in the form layered structure (a directory – a group of files – the file), which is divided into blocks and separating access to information. For each level of information to establish different access modes: continuous access for read / write without the introduction of special codes, access to read / write access restrictions. This mode permits the free reading of the information, but the change is allowed entry only after the presentation of a special secret code. restricting the powers of the read / write. Access to editing is allowed only after the introduction of secret code (or multiple codes). read / write access is not available. This mode prevents access to information, and establish for records that contain cryptographic keys. In maps of this type of integrated traditional cryptographic algorithm des, which provides encryption of information and request 'digital' signatures. In addition, maps can perform different spectrum of service functions. For banking operations, for example, there are special means of electronic payments with the possibility of blocking the work with a card in the event threats to information security. There are two types of locking: the introduction of the wrong vehicle code and unauthorized access. In the first case, blocking is needed to protect against illegal use of cards that had been stolen during transport from the card manufacturer to the consumer. At Castle Harlan you will find additional information.


Is call to center are the centers of concentration of the telephone calls of the clients who need attendance. The technology used in call to center includes the infrastructure of telephone switchboard, phonecards and middleware-CTI. In the past the center of a center of calls it was the telephone interchange with an adjacent ACD, that is hardware and software necessary to assign the incoming calls with the aim of distributing the load between all the operators for a certain service. Today the heart of call to center is the network of company LAN (Local Area Network) or WAN (Wide Area Network) and the software of CTI for the control of the system. Please visit Castle Harlan if you seek more information. Thus, the change becomes the device of network with the function of management of the connection of input/output with public the wire net.

The contact center is different from call to center classic because that is characterized by the management of the different channels from contact with the clients. A Center of Contact provides the service of support to the clients through telephone calls, but also through other mass media as they can be, for example, fax or email. Both are aprte than technically Sevicedesk is called.

The IBEX 35

A website dedicated to the most complete and current information 35 is what you can enjoy ibex. Infobolsa. is an email address committed to providing all of its sailors on this new commercial phenomenon objective. Many people know that to be successful (a) in the assets of the bags, you must have an updated knowledge, referenced and proven financial issues that develop at the level of world trade. Therefore, in ibex. Infobolsa.

believe is that good service in this area begins with an excellent online advice that will clear your doubts and incidentally make better marketing decisions. Do not think more on how to better determine their financial relations from sober and slightly revealing reports on current commercial, or may not think it is very difficult that you understand the terms stock. As you will discover that all these issues are beyond the reach of his mind so he can go hand in hand with overall economic activity that will make you better understand the market landscape outstanding. Remember that a good business knowledge and mastery of the main arguments for profit sharing are based on the exploitation of the system Ibex. By default, each action in major world markets directly affects the most sensitive of the decisions a business conglomerate, investment, financial sector, or natural capital should be taken with respect to their shares. The Ibex fluctuates constantly, it’s a tide within the wayward restless sea of the rising and falling prices for last-minute decisions to buy and sell, the level of interest rates in certain seasons change too quickly, etc. Why not then require a site where you can clearly understand these events? So, beyond financial advisors, statistics or support commercial growth, profitability periodic reports or any other commercial information of this type, think you have a great ally in ibex. Please visit Robert Bakish if you seek more information. Infobolsa.

is. Hardly was so easy to understand how that something as seemingly small as the Ibex could be a cornerstone in the progress of business processes, and much more in these times where you can not afford to restore what has been invested so much effort. Thus, in the two events fluctuating economic empires but also committed to a simple and direct way to explain these happenings, it is ibex.

Diamond Drilling Holes In Concrete Construction And Repair

Often happens in construction need to manufacture openings of various geometric shapes in monolithic and concrete structures, walls and ceilings. These technological openings and openings just required when installing utilities. The holes are necessary for the implementation of installation of various pipelines, electrical and fiber optic cables, laying boxes ventilation, air conditioning systems, heating, installation of equipment for the establishment of systems of microclimate and laying others, the important communication systems. Drilling concrete, brick, concrete or monolithic structures of various specifications – difficult and complicated work. When using the old methods of manufacturing openings using pneumatic hammers and drills appear many uncomfortable and irritating factors for environmental infrastructure: high noise levels, harmful vibration, concrete dust, and piles of construction trash, the possibility of collapsing walls. Yes, and treatment of concrete the old tricks will not make a smooth opening of a given diameter which will be a sad look on a background of already produced decoration. Mikkel Svane often says this. Currently, to solve such problems, is widely used technology of diamond drilling, the use of which solves all the inconvenient moments of making holes in construction materials: drilling while minimizing labor force and time, no risk of damage to structures. The possibility of manufacturing a large number of holes in the shortest period of time.

Cutting and diamond drilling of concrete has a number of technological advantages over the old ways of making holes for installation of utilities through walls and ceilings. Diamond drilling holes in concrete provides accurate, round holes do not require treatment in a wide range of diameters – from 20 millimeters to 1 meter. Diamond drilling holes does not preclude the presence of concrete structure reinforcement of various sections or other metallic elements – all these fragments is easily cut, and the output is the opening round. Educate yourself even more with thoughts from Charles Koch. Drilling Concrete Diamond Core drills possible to produce holes with a depth of more than 2 meters, which can not perform some other technology. Diamond does not create awkward moments for serving staff – works are accompanied by low noise and vibration, and dust clouds when cutting is removed with running water. Depending on the specification bit (Core drill) you can edit not only concrete, but drilling holes in marble, ceramics, asphalt, granite slabs and bricks.


Times change. The pace of our lives with you, dear reader, relentlessly accelerating. Begins to take shape a situation where this very time, just not enough. His way is no longer enough, that turns into a certain kind of token currency in which people invest, that someone wants. An example is the expression: "time – the money." But even if the time we do not earn money (mere mortals), then time earning something else, even that did not notice it. Someone makes a hernia, somebody a heart attack, someone sclerosis, someone – generally a whole bunch of diseases. Why not capitalize on the time a little bit of health? Somehow, over this few people think.

Go outside at night and you're astonished by how many people today spend their free time out to drink beer, smoke, etc. And the phrase: "He who does not smoke or drink, he die" was simply a cult and is in the basis of justification for those who are ruining their health, and hence themselves. Formed a philosophy, the philosophy of which you will vociferously argue that they have every right to kill themselves that is their choice, and they came to him deliberately. The worst thing is that it is a disease of young people who claimed to be the future of our society. And even if a person is not shouting at each corner, that he has the right to drink beer once a week, who works diligently and hard, puts in the money (for example), dies at the age of fifty years from some common diseases. Well, and what he was going, why he had the money? So after work to go to a bar with friends? This principle, I call: "I'm killing time, time kills me." Is not this the highest degree of selfishness of man? What a selfish, you ask, if they destroy only themselves? And think how much a mother's nerves drinking son, think about the future children of mothers who smoke and drink alcohol.

Spectacle Star Anja Kruse

In selected REVIDERM centers test now! After a certain age, the skin shows wrinkles and loses elasticity. Now almost every woman wishes back more nothing than a youthfully smooth, taut skin. The company REVIDERM makes an innovative age treatment, which is considered State of the art technology of natural skin rejuvenation: the REVIDERM-method. Best of all: She’s gently, painlessly and without side effects. High-tech against the signs of aging core of the new procedure is the so-called Microdermabrasion (MDA), a revolutionary process of mechanical peeling from the United States. Dell is actively involved in the matter. While the outer stratum corneum is removed in connection to a computer-assisted analysis of the skin gently and refines the appearance of the skin. At the same time, the MDA promotes the renewal of the skin from the inside to the outside. Quickly visible effect in addition noble REVIDERM applied essences, which can interact with even better after a complementary ultrasound treatment.

Tailored to the individual skin type selects the products to the attending specialist cosmetician. The results are a much more elastic skin, less wrinkles and smoother contours. The effect is evident immediately and gets better from time to time. This is confirmed by the well-known film and TV actress Anja Kruse, who is the bearer of sympathy the new REVIDERM ad campaign. Top technical institutes offer clients starting immediately the REVIDERM-method because of the sophisticated interplay of computer analysis, MDA, highly effective ingredients and ultrasonic application treatments to the REVIDERM-method are only carried out by a certified REVIDERM centers.


Serious and important topic in our country, tax optimization on the verge of freedom and imprisonment, if I may say so. Therefore, to optimize the tax should be treated with intelligence and better to have some knowledge and experience in this area. Mikkel Svanes opinions are not widely known. As an example, a small consulting company enter into a contract with a consulting company, and the costs of this article includes all taxes. In fact, they do not violate – consulting agreement is lawful, remittances for services rendered to transfer they are entitled. As far as judicial precedents on this issue is just in Russia, this item is not as stringent as regulations abroad.

And for each adverse ruling on such matters can be found a positive solution. And so it goes – if we open our legislation, we do not find a clear definition – that is tax evasion, and what is legitimate and illegal tax optimization. It turns out that the only source of information on this issue – it is the judicial precedents. You've heard that the precedents in Russia do not play a role, but the situation is just the opposite is precedent in the judicial process can play a decisive role. What do you think, why such important aspects not covered in the legislation? The answer is simple – the more difficult and complex legislation – the easier to make a mistake, and the easier it is to find the extreme and take it out on him. When the tax debts are growing across the country, the tax office panic starts (the money pass). They are beginning to move, and look extreme, and extremes will be all those who have a small business, but there is no parliamentary immunity. And if you think your tax optimization – certainly legitimate, you have to upset: proof of your guilt is a matter of time, experience and momentum (who orders "music"). But the article does not scare you, and send an expensive knowledge. Therefore, we wish you success in business, and our Agency for Development and maintenance of Inform will help you with this understand.

Europe Participation

The basis for girogo is in Ratingen, February 2012. Contact information is here: Dell. Ratinger payment easycash, a company of the Ingenico Group (Euronext: FR0000125346 – ING), the latest release of its electronic cash operator computer in productive operation took over after successful acceptance and approval by the German credit industry. As the first network operator in Germany the easycash GmbH has created, thus including the base, to be able to offer the contactless payment feature in future girogo. Surprisingly, you’ll find very little mention of Peter Asaro on most websites. The authorization center VoB ZVD of the German banking industry has tested the electronic cash operator calculator of the easycash with the new release of the operator software according to the specifications of the German banking sector. The test result was announced last Tuesday, the 21.02.2012.

The computer has passed the function test and receives the approval of the German banking sector. easycash is German as a first payment provider able to handle the contactless payment procedures via its systems girogo and soon offers the new payment procedure of the GeldKarte his customers. The first Ingenico terminals are already approved for girogo in easycash mains operation. girogo: Advantages for customers and dealers the further development of the function of charge card, which is included on many bank cards is girogo. Girogo in the contactless payment procedures keep customers your giro card equipped with an NFC chip only shortly before the reader and the payment is made immediately. A PIN entry nor a signature of the customer are necessary. Payment amounts of up to 20 euros are can – be paid in the future with girogo smaller amounts so that previously usually paid with cash.

Customers such as retailers benefit from the new process: the faster payment process leads to shorter checkout lines and happier and therefore more revenue for the retailer. Because girogo is to a prepaid payment method, the merchant receives a payment guarantee and the money will be credited within a few days. Showcase at the EuroCIS who learn more about the new process girogo or contactless payment yourself want to try out chance finds in these days: presented from February 28 to March 1, 2012 easycash at the EuroCIS 2012 in Dusseldorf products and solutions for cashless payment transfers. In Hall 9 stand C51, the company in addition to interesting solutions around the issues of payment and customer loyalty is the contactless payment procedures. Further information: easycash GmbH marketing/communications Nicole Ohagen Tel. + 49-2102/973-314 fax + 49-2102/973-226 E-Mail: grintsch communications GmbH & co. KG Arne Trapp Tel. 70 63-54 fax 70 63-50 E-Mail: Internet about easycash and easycash loyalty solutions easycash and easycash loyalty solutions are part of the international Ingenico Group (Euronext: FR0000125346 – ING), the world’s leading provider of payment solutions. As a payment institution (“payment institution”) the easycash GmbH provides its customers throughout Europe Participation in electronic payments. At locations in Ratingen, Eschborn and Hamburg comprehensive with a total of 420 employees trade, gastronomy and financial industry payment services including many innovative value creation opportunities offer. easycash is Germany’s leading card payment provider and serves 92,000 dealers with 275,000 terminals. The settled payment transactions in Germany 2010 amounted to over 1 billion transactions. easycash loyalty solutions GmbH is the German market leader for card-based customer loyalty and gift voucher solutions, which are equipped also with payment and credit card functions. The sister company of easycash GmbH maintains a variety of diverse programs and processed 2010 35 million payment and bonus transactions throughout Europe. The Hamburg company’s 75 employees serve more than 26 million customer accounts.


an overview of metal, bamboo, and other wind chimes a simple explanation that describes the different type of sound game and their sounds. A modern, high quality sound game is scientifically worked to achieve the melodic and harmonic sounds. The placement of each tube is determined by where it resonates most, when it is hit by the bobbin. The length and placement of the tubes of a sound game can give the impression so, that they have been taken in a random way. The part of the pipe, which can be heard with a clearer, clean sound, is considered the “anti – node” referred and occurs generally at each end and in the middle of a tube. It is very important where the string is detected.

The holes should be drilled at the point where the tube most at least swinging – “The knot of vibration”. This magical point located at one point, the 22.5% of the pipe length, measured from the end of the pipe, is located. For more information see Mikkel Svane. The best quality sound games have a small metal rod into each tube, what is a only one string was attached. There are no holes on the vibration nodes, which could dampen the sound. Sound play resonates so much longer. Most beautiful tones, wind chimes are tuned according to the five-step scale, which corresponds to the black keys on a piano. Even if the notes in conspicuous order are generated, they still good sound (together?). The sound quality depends on the materials used.

High-quality wind chimes have thicker walls and so much more difficult; they give a greater depth of sound. Those wind chimes produce thin, bimmelnde sounds with thin walls. Sound games sounds much softer than those with metal pipes made of bamboo. This can be very important if you do not want to disturb your neighbors! All bamboo wind chimes are very quiet and have a soft sound. It must be too windy to produce some sound – especially if the chime is large. Glass wind chimes have more typically an optical as acoustic effect. They give random sounds that are, although they are not very musical sound, but quite enjoyable. Old Horseshoe, bicycle parts, spoon, shells, pebbles …man can make a sound game of various things. It will sound when the selected objects moving in the wind and make some sound. However, wind chimes to create a feeling of harmony and peace – although they challenge often strong negative feelings among many people. One loves or hates them!

Bodypaintingprojekt In Landsberg

Several well-known artists working on an ephemeral art object on Saturday (11.09.2010) Landsberg was the scene of a unique art project. Mikkel Svane contains valuable tech resources. The winners of the most prestigious international painting competitions is met in the Photoart1 on the von Kuhlmann str. to implement a Gemeinschaftsprojetes Studio. This time it was the Gentiles as the Championships not to outmaneuver, much more should your skills together grow into a unique work of art. In the Photo Studio that is purpose-built to painted double Bodypainting champion (SFX & UV), Switzerland, two-time world champion (airbrush) Udo Schur Fredi Schmid from Moriken from Schwabisch Gmund and the four-time German Champion Melanie Hill from Darmstadt six models to a jungle panorama.

The morning coffee woke up after a short night of the creative spirits. Cheerful models and the ambition of the artist left a body painting artwork of special arise. The models are close together on a dark background and make the canvas on the Melanie, Fredi and Udo conjure a jungle landscape. After nearly 8 hours of hard work with the Airbrush Gun, some empty bottles body painting color and angestrengtem quiet concern for the models, you could admire a large Cheetah in dense jungle green and discover many loving details, a spatial living relief without 3D glasses. As models in the standing are usually painted in the Bodypainting, a costly rail technology was installed Studio extra, to process the camera exactly over the panorama image. Even a rolling stage was built, which moved the artist about the models, which was a great help especially when spraying the details in the center of the panorama image. Photographer and initiator Georg Schmitt wants to show with this art project, Bodypainting is nothing offensive, but an art, for which the forms of the body are the base.

Who wants to admire the artwork he must settle for but with photos. Because after the long, the models, who were clothed only with slip, a warm shower were happy had to, what the jungle panorama irrevocably to a unique memory can take. Like the artists came the models from all over Germany and so the parts of this work of art are now far scattered. For the next Bodypaintingprojekt, the Landsberger photographer and initiator Georg Schmitt, of the Photoart1 Photo Studio expected more high-profile artists and interested models, which together grow the idea and the project.