Addition of a log house made of logs harvested Chopped wall bath as well as wall houses (the thickness of the walls of the timber – 14-16 cm, from a bar – 10-14 cm). They are composed of individual crowns horizontally stacked and connected by a push- wood studs placed 1-1.5 m in length staggered in height of the walls. A log house is made up of rims. In walls with windows pick up the lower shrouds and 5, depending on the thickness of the timber, the top 2 or 3. At the wall, with only door, prepare the 2 bottom rim and top 5. About half the height of the wall will be laid another solid crown, which you then carve in the openings. Lower crown – salary – is made from a thick logs of pine, oak or larch the rest – the rank and file, with a smaller cross section. At the foundation baths, covered with waterproofing, put the lower crown.
Use the cross-bars as a lining. Between the foundation and the salary gap is formed. It must be to lay bricks and pour the cement mortar, previously covered the logs with two layers of roofing material in contact with the solution. Butt logs of the upper rim make oblique tension lock with a tooth. You can join a short timber vertical ridge, not more than one joint at a crown, all crowns, except for the bottom. In this case the joints should not be placed above each other. Layout the vertical diameter of logs next step after collection of logs – marking vertical diameter of the logs on both sides. This operation is done to obtain the correct marking 'leg' or ridges and edges OmeG logs.
Otherwise, definitely get skewed. You will have to perform long and time-consuming adjustment vrubki. Diameters by means of marking up a heavy pitch.